HP StorageWorks XP Remote Web Console Software - Manual (Page 86)

Figure 38 Suspend Volume Pair Dialog Box
The Suspend Volume Pair dialog box consists of the following components:
• Suspend Volume Pair Volume List
The Volume List located on the upper side of the Suspend Volume Pair dialog box displays the
following information pertaining to the S-VOL and T-VOL of the pair you want to suspend:
• Source Vol: The CU:LDEV of the S-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.
00:01#)
• Status: The pair status (Simplex, Pending, Duplex, Split, Resync, Suspend, SP-Pend, Resync-R,
V-Split, F-Copy).
• Target Vol: The CU:LDEV of the T-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.
00:01#).
• Type: The emulation type of the S-VOL and T-VOL.
• Capacity(CYL): The number of cylinders assigned to the volume.
• CLPR(S): The cache logical partition of the S-VOL.
• CLPR(T): The cache logical partition of the T-VOL.
• The OK button adds the operation setting(s) to suspend the selected pair(s) displayed in the
Suspend Volume Pair Volume List to the Preset List on the Siz main window.
NOTE:
You must click the Apply button on the Siz main window to apply the Suspend Volume Pair operation
setting(s) displayed in the Preset List to the HP StorageWorks XP12000 storage system.
• The Cancel button cancels the operations set in the Suspend Volume Pair dialog box and closes
the Suspend Volume Pair dialog box.
86 Performing Hitachi ShadowImage for z/OS Operations