HP StorageWorks XP Remote Web Console Software - Manual (Page 64)

NOTE:
The number of volumes that can be displayed in the Volume List at one time is 1,024 volumes. If the
number of volumes defined in the storage system exceeds this limit, use the Previous and Next buttons on
the upper right of the Volume List to turn the pages of the Volume List and see the entire list.
Figure 28 Volume List
The Volume List lists all the installed volumes (LDEVs) on the selected CU image and displays the following
information for each volume:
• Source Vol: The CU:LDEV (control unit image:logical device ID) of the source volume (S-VOL).
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is an external volume (e.g.
00:01#). For more information, see the HP StorageWorks External Storage XP user guide for the
XP12000, XP10000, SVS200 .
• Status: The status of the Siz pair status of the volume pair:
Simplex, Pending, Duplex, Split, Resync, Suspend, SP-Pend, Resync-R, V-Split, F Copy, Deleting
• Target Vol: The CU:LDEV (control unit image:logical device ID) of the T-VOL. If there is no T
VOL, --- is displayed.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is an external volume (e.g.
00:01#). For more information, see the HP StorageWorks External Storage XP user guide for the
XP12000, XP10000, SVS200 .
• Copy Pace: The specified copy pace (Slower, Medium, or Faster) is displayed.
• Prog./Sync.: The information displayed under this column varies according to the pair status.
64 Performing Hitachi ShadowImage for z/OS Operations