HP StorageWorks XP Remote Web Console Software - Manual (Page 79)

Figure 36 Split Volume Pair Dialog Box
The Split Volume Pair dialog box consists of the following components:
• Split Volume Pair Volume List
The Volume List located on the upper side of the Split Volume Pair dialog box displays the
following information pertaining to the S-VOL and T-VOL of the pair that you want to split:
• Source Vol: The CU:LDEV of the S-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.
00:01#).
• Status: The pair status (Simplex, Pending, Duplex, Split, Resync, Suspend, SP-Pend,
Resync-R, V-Split, F-Copy).
• Target Vol: The CU:LDEV of the T-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume
(e.g. 00:01#).
• Type: The emulation type of the S-VOL and T-VOL.
• Capacity (CYL): The number of cylinders assigned to the volume.
• CLPR(S): The cache logical partition of the S-VOL.
• CLPR(T): The cache logical partition of the T-VOL.
• The Copy Pace drop-down list allows you to choose the copy pace (from Slower, Medium, or
Faster) for all the pairs that you are splitting.
Hitachi ShadowImage for z/OS user guide 79