HP StoreEver TapeAssure Software - Manual (Page 59)

Table 6 Information available from the Drive Properties window Environment tab (continued)
Description Item
support. Note that a warning will normally trigger an
alert.
8. Click the Performance tab.
The Performance page appears.
Figure 15 Drive Properties window Performance tab
Information provided on the Performance page is explained in Table 7 (page 59) .
Table 7 Information available from the Drive Properties window Performance tab
Description Item
Data Transfer
The estimated transfer rate of the host averaged over the data transferred
to/from the tape since the last load. Estimated Host Transfer Rate
The actual, measured native transfer rate with that drive and tape. Media Transfer Rate
The Maximum Media Transfer Rate is determined by the drive type and
represents the maximum native transfer rate specified for that drive type. Maximum Media Transfer Rate
Compression
The average write compression ratio of the data written to tape since the
last load. Write Compression Ratio
The average read compression ratio of the data read from tape since the
last load. Read Compression Ratio
Viewing detailed LTO drive information 59