HP StoreEver TapeAssure Software - Manual (Page 56)

Table 4 Information available from the Drive Properties window Overview tab (continued)
Description Item
is complete but if the backup aborts it is possible that media removal will still
be prevented. Refer to HP support documentation for resolution.
The negotiated SCSI data rate. Negotiated SCSI Burst Rate
property
6. Click the Health tab.
The Health page appears.
Figure 13 Drive Properties window Health tab
Information provided on the Health page is explained in Table 5 (page 56) .
Table 5 Information available from the Drive Properties window Health tab
Description Item
Read/Write health (last loaded tape)
A measure of the amount of tape used to write high
quality data to the last loaded tape with the amount of
data written to the tape since it was last loaded. Write Health
Even if the warning is reported, the data will still have
been written at high quality (unless the drive reported
an error) but more tape was used than recommended
by HP. A warning will normally trigger an alert. If
appropriate, maintenance recommendations are made,
such as to clean the drive and/or replace the tape. HP
recommends the use of HP media for maximum
confidence.
56 Using TapeAssure in the L&TT WebGUI