Copying from the keypad, Controlling how your copies will look – HP Officejet 600 All-in-One Printer User Manual

Page 74

4-2

Copying from the Keypad

Copying from the keypad only supports black and white copying.
Also, copying from the keypad is not recommended for large or
complex documents. Copy color documents or large documents using
the Document Assistant.

Note:

You may want to use the scan/copy sleeves provided to protect

fragile or damaged original documents or photos for copying. For
more information regarding these sleeves, refer to “Using a Scan/
Copy Sleeve to Protect Your Original” on page 2-3.

If your original document is a photograph, or if you want your copies
to be darker or lighter than your original, use the instructions in the
section, “Controlling how your copies will look” below.

Load your document with the printed side facing
away from you. You can load up to 20 pages, or a
single scan/copy sleeve. If necessary, slide the

document guides

on the tray to the left or right to

adjust them for the width of your document.

Note:

Always remove staples and paper clips from

your original before copying to avoid equipment
damage.

Press the

Copy

button, then enter the number of

copies you want (up to 99).

Press the

Copy

button again to begin copying.

The entire original document will be scanned
before copying begins.

To cancel a copy in progress, press the

Stop

button

on the HP OfficeJet’s keypad.

Controlling how your copies will look

When you make a copy from the HP OfficeJet’s keypad, the way it
looks is determined by the Contrast and Resolution settings that are
selected on the keypad with the

Contrast/Resolution

button.

Note:

The

Contrast/Resolution

settings also affect the quality of

paper faxes sent from the keypad. See “Changing the Resolution” on
page 3-9 and “Changing the Contrast” on page 3-12.

Document
guides