Insert the print cartridges – HP Officejet 600 All-in-One Printer User Manual

Page 13

1-5

1. Se

ttin
g Up

Insert the Print Cartridges

●

After you plug in the power, the HP OfficeJet powers up
automatically. The display on the keypad will read, “Insert Color
Cartridge.”

●

Wait until the HP OfficeJet finishes start-up (about 10 seconds),
then open the

cover

of the HP OfficeJet. The empty print

cartridge holder moves into view.

●

Remove the

color

print cartridge from its

packaging. Holding the blue top of the
cartridge, gently remove both pieces of tape
— clear blue and solid white — covering the ink nozzles and vent
hole. (If you do not remove the white tape, the ink will be
depleted prematurely.)

Be careful not to touch the ink nozzles or the copper contacts; fin-
gerprints may damage them.

●

Next, place the

color

cartridge into the

cartridge holder

on the right as
shown:

First slide in

the bottom until it
clicks into place.

Then push the

top forward until
the cartridge snaps
into place.

Cover