HP Officejet 600 All-in-One Printer User Manual

Page 111

7-13

Getti

g H

elp

Load doc to send

You’ve specified that
you want to begin
sending a group fax,
but there’s no
document loaded in
the document tray.

Load the document in the
document tray that you want
to send as a group fax. Then
press the

Start

button.

Load legal-size
paper, then press
START.

The paper or envelope
you loaded in the paper
supply tray has a
narrower width than
the paper size that’s
needed for receiving
faxes or printing.

(Legal-size paper is
8.5 x 14 inches.)

Do either of the

following:

•

Load legal-size paper in the

paper supply tray.

•

If you’re printing on

envelopes, change the paper
size (in your software
program’s page setup
settings) to envelopes.

Press the

Start

button to

clear the message.

Memory full, press
START

While you were
sending a group fax or
making a copy, the HP
OfficeJet’s memory
filled to its capacity.

Press

Start

to clear the

message.

Select the appropriate

case:

•

If you were sending a

group fax from the keypad

using a speed dial code:

Send the document using the
Document Assistant (more
memory is available).

• If you were making a

copy:

Try copying from the
Document Assistant. For step-
by-step illustrated
instructions, refer to Chapter
4.

This keypad

message:

Has this meaning:

And this action is

recommended: