HP Officejet 600 All-in-One Printer - Manual (Page 110)

7-12
Insert connector The fax/phone line
connector has been
removed.
(This is the connector
to which your phone
cords are attached. It
fits into the back of the
HP OfficeJet.)
The HP OfficeJet can’t
send or receive faxes
until the connector is
replaced.
For safety, press the
On/Off button to turn off the
HP OfficeJet before re-
installing the fax/phone line
connector.
Re-install the fax/phone
line connector.
For illustrated instructions,
refer to “2. Plug in the Line
Connector” on page 1-3.
Press the On/Off button
to turn on the HP OfficeJet,
then click
Reconnect now on
your computer screen.
Load A-size paper,
then press START. The paper or envelope
you loaded in the paper
supply tray has a
narrower width than
the paper size that’s
needed for receiving
faxes or printing.
(A-size is letter-size
paper, 8.5 x 11 inches.)
Do either of the
following:
• Load A-size paper in the
paper supply tray.
• If you’re printing on
envelopes, change the paper
size (in your software
program’s page setup
settings) to envelopes.
Press the Start button to
clear the message.
Load A4-size paper,
then press START. The paper or envelope
you loaded in the paper
supply tray has a
narrower width than
the paper size that’s
needed for receiving
faxes or printing.
(A4-size is European
letter-size paper, 210 x
297 mm.)
Do either of the
following:
• Load A4-size paper in the
paper supply tray.
• If you’re printing on
envelopes, change the paper
size (in your software
program’s page setup
settings) to envelopes.
Press the Start button to
clear the message.
This keypad
message:
Has this meaning:
And this action is
recommended:
1
2
3
1
2
1
2