Print quality troubleshooting – HP Photosmart D5345 Printer User Manual
Page 88
Cause: The HP Photosmart is turned off.
Solution: Turn the HP Photosmart on.
Cause: The computer is turned off.
Solution: Turn the computer on.
Cause: The HP Photosmart is not properly connected to the computer.
Solution: Check the connection from the HP Photosmart to your computer. Verify
that the USB cable is securely plugged into the USB port on the back of the
HP Photosmart. Make sure the other end of the USB cable is plugged into a USB port
on your computer. After the cable is connected properly, turn the HP Photosmart off
and then on again.
For more information on setting up the HP Photosmart and connecting it to your
computer, see the Setup Guide that came with the HP Photosmart.
Print quality troubleshooting
If you are having problems with print quality, try the solutions in this section and observe
the following guidelines:
•
To achieve the best print quality, HP recommends using HP papers that are
specifically designed for the type of project you are printing along with genuine HP
ink. HP papers and HP ink are specifically designed to work well together to provide
high-quality output.
•
Replace refilled or empty cartridges with genuine HP print cartridges.
•
Check the device settings to make sure that the print mode and paper selection is
correct for the paper and the task.
For more information, see
“Set the paper type for printing” on page 29
papers for printing” on page 15
.
•
Print and evaluate a self-test.
For more information, see
“Print a self-test report” on page 58
Print quality troubleshooting
87
Trou
bles
ho
ot
ing