HP Scanjet Enterprise 8500 fn1 Document Capture-Workstation - Manual (Page 73)

6. Press down on the front portion of the separation pad component until you hear an audible click,
indicating that the pad is seated firmly.
TIP: Taking care not to touch the pad with bare fingers, press down on the pad and then
release, ensuring that the pad springs back up. This indicates that the spring below the pad is
positioned correctly.
7. Close the ADF hatch, reconnect the power supply to the product, and then turn on the product.
8. Update the product maintenance history.
a. On the Home screen, touch the Administration button.
b. Touch the Manage Supplies button, touch the Reset Supplies option, and then touch the New
Document Feeder Kit option.
Replace the separation pad 65