HP Scanjet Enterprise 8500 fn1 Document Capture-Workstation - Manual (Page 66)

2. Open the automatic document feeder (ADF) hatch.
3. Remove any visible lint or dust from each of the feed rollers and the separation pad using
compressed air or a clean lint-free cloth moistened with warm water.
4. Close the ADF hatch, and then reconnect the power supply to the product.
5. Press the Power button to turn on the product, and then update the product maintenance history.
a. On the Home screen, touch the Device Maintenance button.
b. Touch the Clean Rollers button.
c. Scroll down through the online maintenance procedure and touch the Complete Maintenance
Procedure button.
d. Touch OK to record the maintenance activity and reset the counters to zero.
58 Chapter 7 Maintain the product