HP Scanjet Enterprise 8500 fn1 Document Capture-Workstation - Manual (Page 21)

Table 3-3 IP addressing
Service name Description
DHCP (Dynamic Host Configuration Protocol) For automatic IPv4 and IPv6 address assignment. The DHCP
server provides the product with an IP address. Generally, no
user intervention is required for the product to obtain an IP
address from a DHCP server.
BOOTP (Bootstrap Protocol) For automatic IP address assignment. The BOOTP server
provides the product with an IP address. Requires the
administrator to input a product's MAC hardware address on
the BOOTP server for the product to obtain an IP address from
that server.
Auto IP For automatic IP address assignment. If neither a DHCP server
nor a BOOTP server is present, the product uses this service to
generate a unique IP address.
Manual For manual IP address assignment. Requires the administrator
to manually assign a static IP address.
Table 3-4 Security features
Service name Description
IPsec/Firewall Provides network-layer security on IPv4 and IPv6 networks. A
firewall provides simple control of IP traffic. IPsec provides
additional protection through authentication and encryption
protocols.
SNMP v3 Employs a user-based security model for SNMP v3, which
provides user authentication and data privacy through
encryption.
Access control list (ACL) Specifies the individual host systems, or networks of host
systems, that are allowed to access the server and the
attached network product.
SSL/TLS Allows you to transmit private documents via the Internet and
guarantee privacy and data integrity between the client and
server applications.
IPsec batch configuration Provides network-layer security through the simple control of IP
traffic to and from the product. This protocol provides the
benefits of encryption and authentication and allows for
multiple configurations.
Supported e-mail protocols
The product supports Simple Mail Transfer Protocol (SMTP) and Lightweight Directory Access Protocol
(LDAP).
Supported e-mail protocols 13