HP Scanjet Enterprise 8500 fn1 Document Capture-Workstation - Manual (Page 26)

Table 3-6 Jetdirect menus (continued)
Menu item Sub-menu item Sub-menu item Values and Description
DHCPV6 Policy Router Specified : The stateful auto-configuration
method to be used by the Jetdirect server is
determined by a router. The router specifies whether
the Jetdirect server obtains its address, its
configuration information, or both from a DHCPv6
server.
Router Unavailable (default): If a router is not
available, the Jetdirect server should attempt to obtain
its stateful configuration from a DHCPv6 server.
Always : Whether or not a router is available, the
Jetdirect server always attempts to obtain its stateful
configuration from a DHCPv6 server.
Primary DNS Use this item to specify an IPv6 address for a primary
DNS server that the Jetdirect server should use.
Secondary DNS Use this item to specify an IPv6 address for a
secondary DNS server that the Jetdirect server should
use.
Proxy Server Specifies the proxy server to be used by embedded
applications in the product. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet
security, for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you may need to contact your
Independent Service Provider (ISP) for the proxy server
address.
Proxy Port Type the port number used by the proxy server for
client support. The port number identifies the port
reserved for proxy activity on your network, and can
be a value from 1 to 65535.
Idle Timeout The time period, in seconds, after which an idle TCP
data connection is closed, and can be a value from 0
to 3600 (default is 270 seconds, 0 disables the
timeout).
Security Secure Web For configuration management, specify whether the
Embedded Web Server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
HTTPS Required : For secure, encrypted
communications, only HTTPS access is accepted. The
Jetdirect server will appear as a secure site.
HTTPS Optional (default): Access using either HTTP or
HTTPS is permitted.
18 Chapter 3 Administration - Configure the product