HP Scanjet Enterprise 8500 fn1 Document Capture-Workstation - Manual (Page 27)

Table 3-6 Jetdirect menus (continued)
Menu item Sub-menu item Sub-menu item Values and Description
IPSec Specify the IPSec status on the Jetdirect server.
Keep : IPSec or firewall status remains the same as
currently configured.
Disable (default): IPSec or firewall operation on the
Jetdirect server is disabled.
802.1X Reset 802.1X settings to factory defaults.
Reset : Reset 802.1X settings to factory defaults.
Keep (default): Retain current 802.1X settings.
Announcement Agent Set announcement agent preferences.
Enable (default): Enable the announcement agent.
Disable : Disable the announcement agent.
Reset Security Specify whether the current security settings on the
Jetdirect server will be saved or reset to factory
defaults.
Yes : Security settings are reset to factory defaults.
No (default): The current security settings are
maintained.
Diagnostics Embedded Tests LAN HW Test Yes : Run a LAN hardware test.
No (default): Do not run a LAN hardware test.
HTTP Test Yes : Run an HTTP test.
No (default): Do not run an HTTP test.
SNMP Test Yes : Run an SNMP test.
No (default): Do not run an SNMP test.
Data Path Test Yes : Run a data path test.
No (default): Do not run data path test.
Select All Tests Yes : Select all tests.
No (default): Do not select all tests.
Execution Time (H) Set the time delay, in hours, for test execution. When
you click
Execute , the selected tests will execute after
this interval. Valid values are 0–24, default is 1.
Execute Yes : Execute the selected tests..
No (default): Do not execute the selected tests.
Basic configuration using the Administration menu 19