HP Insight Management Agents - Manual (Page 70)

Temperature Information
This information is not available for all types of storage systems.
•
Description displays the description of the temperature sensor. The following values are
possible:
◦ Fan Bay - This temperature sensor is located on the fan module in the fan bay.
◦ Backplane - This temperature sensor is located on the SCSI drive backplane.
◦ Unknown - The Storage Agents are unable to determine the location of this storage system
temperature sensor.
•
Status displays the status of the temperature sensor. The following values are possible:
OK - The temperature is OK. ◦
◦ Degraded - The temperature is degraded.
◦ Failed - The temperature is failed.
◦ Unknown - The Storage Agents are unable to determine the storage system temperature
sensor status.
•
Current Value displays the current temperature value.
•
Limit Value displays the threshold value of the temperature sensor.
Fan Information
This information is not available for all types of storage systems.
•
Description displays the description of the fan module. The following values are possible:
Fan Bay 1 - This fan module is installed in the first fan bay. ◦
◦ Fan Bay 2 - This fan module is installed in the second fan bay.
◦ Fans - This is a composite of all the installed fan modules.
◦ Unknown - The Storage Agents are unable to determine the location of this storage system
fan module.
•
Status displays the status of the fan module. The following values are possible:
OK - The fan module is installed and operating normally. ◦
◦ Degraded - The fan module degraded.
◦ Failed - The fan module is failed. Replace the fan module.
◦ Not Installed - The fan module is not installed.
◦ Unknown - The Storage Agent is unable to determine if this storage system fan module is
installed.
•
Serial Number displays the serial number for the fan module. Use this information for
identification purposes.
•
Board Revision displays the board revision of the fan module.
70 Agent information