HP Insight Management Agents - Manual (Page 69)

◦ Duplex Bottom - This is the bottom portion of a duplexed storage system.
◦ Unknown - The Storage Agents are unable to determine if this storage system is duplexed.
Backplane Information
This information is not available for all types of storage systems.
•
Firmware Revision displays the revision level of storage system backplane.
•
Drive Bays displays the number of drive bays on this storage system backplane.
•
Duplex displays the storage system backplane duplex option. The following values are possible:
Not Duplexed - This storage system is not duplexed. ◦
◦ Duplex Top - This is the top portion of a duplexed storage system.
◦ Duplex Bottom - This is the bottom portion of a duplexed storage system.
◦ Unknown - The Storage Agents are unable to determine if this storage system is duplexed.
Asset Information
This information is not available for all types of storage systems.
•
Board displays the type of board (system, power, or SCSI).
•
Serial Number displays the serial number of the board.
•
Board Revision displays the revision number of the board.
Power Supply Information
This information is not available for all types of storage systems.
•
Description displays the description of the power supply. The following values are possible:
Power Bay 1 - The power supply is installed in the first power supply bay. ◦
◦ Power Bay 2 - The power supply is installed in the second power supply bay.
◦ Power Supplies - This is a composite of all the installed power supplies.
◦ Unknown - The Storage Agents do not recognize the bay. You may need to upgrade your
software.
•
Status displays the status of the power supply. The following values are possible:
OK - A power supply is installed and operating normally. ◦
◦ Degraded - At least one of multiple power supplies has failed or lost power.
◦ Failed - A power supply is installed and is no longer operating. Replace the power supply.
◦ Not Installed - Nothing is installed in this power supply bay.
◦ Unknown - The Storage Agents are unable to determine if this storage system power
supply bay is occupied.
•
Serial Number displays the serial number of the power supply. Use this information for
identification purposes.
•
Board Revision displays the board revision of the power supply.
•
Firmware Revision displays the firmware revision of the power supply.
Storage agent 69