HP Insight Management Agents - Manual (Page 109)

◦ IPv4z - The address is an IP version 4 address with a zone index.
◦ IPv6z - The address is an IP version 6 address with a zone index.
◦ DNS - The address is a DNS domain name.
◦ Unknown - The address is empty or the address type is unknown.
•
Address displays the portal IP address.
•
Portal Tag displays the portal aggregation tag value.
Session Information
The information displayed for each iSCSI Session entry in the submenu includes session information,
session statistics, and the associated connections.
Session Information
•
Initiator Name displays the full name of the initiator.
•
Target Name displays the full name of the target.
•
Initiator Alias displays the alias name of the initiator. If no alias name has been defined for
the initiator, this field will be blank.
•
Target Alias displays the alias name of the target. If no alias name has been defined for the
target, this field will be blank.
•
Direction displays the direction of this session. The following values are valid:
Inbound - session is established from an external initiator to a target within this iSCSI
instance. ◦
◦ Outbound - session is established from an initiator within this iSCSI instance to an external
target.
•
Target Handle displays the target-defined identification handle for this session.
•
Session ID displays the initiator-defined portion of the iSCSI Session ID.
•
Initial R2T displays the request-to-transmit setting. The following values are valid:
No - initiator may send data immediately, within limits set by First Burst and the expected
data transfer length of the request. ◦
◦ Yes - indicates that the initiator must wait for an R2T before sending to the target.
•
Session Type displays the type of session. The following values are valid:
Discovery - this session is being used only for discovery. ◦
◦ Normal - this session is a normal iSCSI session.
•
First Burst displays the maximum length supported for unsolicited data sent within this session.
•
Immediate Data Indicates whether the initiator and target have agreed to support immediate
data on this session. The following values are valid:
◦ Yes - immediate data in this session is supported.
◦ No - immediate data in this session is not supported.
•
Maximum Burst displays the maximum number of bytes which can be sent within a single
sequence of Data-In or Data-Out PDUs.
Storage agent 109