HP Insight Management Agents - Manual (Page 135)

•
xorWithFaults—The system is protected by Advanced Memory Protection in the XOR memory
mode. One or more DIMM faults have been detected.
•
advancedEcc—The system is protected by Advanced Memory Protection in the Advanced
ECC mode.
•
Advanced Memory Protection Types Available—Displays the options available.
•
XOR—This system is configured for Advanced Memory Protection using the XOR engine.
•
Mirrored memory with dual memory boards—This system is configured for Mirrored Advanced
Memory Protection within a dual memory board configuration. The mirrored memory may be
swapped with memory on the same memory board or with memory on the second memory
board.
•
Mirrored Memory within a single memory board—This system is configured for Mirrored
Advanced Memory Protection within a single memory board.
•
Advanced ECC—This system is configured for the Advanced ECC type of Advanced Memory
Protection
•
Mirrored (deprecated)—This system is configured for Mirrored Advanced Memory Protection
•
Online Spare—This system is configured for Online Spare Advanced Memory Protection.
•
Advanced Memory Protection Type Active—Displays the currently active type of Advanced
Memory Protection based on the types available. The following connection states are supported:
•
Other—The Management Agent cannot determine the Advanced Memory Protection fault
tolerance. You may need to upgrade your software.
•
None—This system is not configured for Advanced Memory fault tolerance.
•
Online Spare Memory— A single spare bank of memory is set-aside at boot time. If enough
ECC errors occur, the spare memory is activated and the memory experiencing the errors is
disabled.
•
Mirrored Memory—This system is configured for Mirrored Memory Protection. All memory
banks are duplicated in Mirrored Memory, as opposed to only one for Online Spare Memory.
If enough ECC errors occur, the spare memory is activated and the memory experiencing the
errors is disabled.
•
XOR—This system is configured for Advanced Memory Protection using the XOR engine.
•
Memory Board—The slot in which the memory board or cartridge is installed.
Other—The value is unsupported or could not be determined. ◦
◦ Present—The board or cartridge has memory and is currently online.
◦ Absent—The board or cartridge is offline.
•
Board Status—This provides the current status of the Advanced Memory Protection memory
board or cartridge. The following status values are supported:
◦ Other—The condition of this memory board or cartridge could not be determined.
◦ OK—The memory board or cartridge is operating normally.
◦ Degraded—The memory board or cartridge is in an error state. Check for correct memory
installation and that the board has been inserted properly.
•
Total Board Memory—This value specifies the size of memory for this board or cartridge,
including memory seen by the OS and the memory used for spare, mirrored, or XOR
configurations.
Sub-system Classification 135