HP Insight Management Agents - Manual (Page 138)

NOTE: A slot number of "system" in the device, or “embedded” in the client workstation, refers
to slot zero.
System Summary
HP System Insight Manager automatically collects configuration information for all devices in the
Responsible Device List. This information is used by filtering subsystems, which allow you to filter
your devices on such things as processor type or network operating system. The type of information
collected during Configuration Data Collection is useful for asset management.
The following System Information is displayed. Information varies depending on the device type:
General Information
•
Product name—Displays the type of device or client PC.
•
Operating system—Displays the type of operating system installed on the device.
•
Server Role—Displays a free form text field intended for briefly describing the system's function
if available.
•
SMBIOS Version—Displays the version of SMBIOS on the device if applicable and available.
•
Machine ID (System Board)—Displays the identification number of the machine.
•
Type of expansion bus—Identifies the device or client bus type as EISA, EISA/PCI, PCI, PCI-X
or PCI-Express.
Description Information
•
System Name—Displays the name of the device.
•
Description—Displays a description of the device, including hardware and software.
•
Network Management Up Time—Displays the amount of time since the network management
portion of the system was last reinitialized.
•
Contact Information—Displays the name of the person to contact about this device.
•
Location—Displays the physical location of the device.
•
IPv4 Address—Displays the network location of the device in IPv4 format.
•
IPv6 Address—Displays the network location of the device in IPv6 format.
Power Management
This section displays the state of power management on the system (enabled or disabled).
Asset Control Information
•
Serial Number—Displays physical the serial number of the device or client system board. Use
this for identification and registration purposes. N/A appears if you do not have a device or
client that supports the asset management feature. Use the System Configuration Utility (or the
appropriate utility for your device or client) to enter a system serial number if one does not
appear and you have a device or client that supports the asset management feature.
•
Serial Number (Logical)— Displays the Logical serial number of the device or client system
board. This field would not be available if the device does not support this feature.
•
Product ID—Displays a unique type of Product and is used for reorder purposes.
•
Asset Tag—Displays a changeable asset control number and is used for identification purposes.
•
Board Rev—Displays the system board revision number.
•
Monitor Model—Displays the monitor model. Use this item for identification purposes.
138 Agent information