HP XP P9500 Storage - Manual (Page 158)

Description Item
of volumes exceeds the number of rows, click Previous or Next to view information about volumes that
do not appear in the list. You can also use the vertical and horizontal scroll bars to view more information.
• VOL: Identifies the volumes in the local storage system. See the figures at the end of this table for an
illustration with identifying callouts.
A device ID ending in # (e.g., 00:00:3C #), indicates the LDEV is an external volume. For details on
an external volume, see HP P9000 External Storage for Open and Mainframe Systems User Guide.
A device ID ending in X (e.g., 00:00:3C X) indicates the LDEV is a Thin Provisioning virtual volume.
For details on a virtual volume, see HP P9000 Provisioning for Open Systems User Guide.
To the right of the icon appears information about an LU path (illustration at the end of this table),
which is a path from hosts to the volume.
The icons are:
This volume is not paired with any other volume. This volume is neither a P-VOL nor a S-VOL.
This is a P-VOL.
This is a S-VOL.
• Status: Indicates the status of pairs.
SMPL: The volume is not currently assigned to a pair. When the initial copy is started by a paircreate
operation, the volume status changes to COPY.
COPY: The initial copy operation is in progress. Data in the P-VOL is not synchronized with data
in the S-VOL. When the initial copy is complete, the status changes to PAIR.
PAIR: The volume is paired with another volume. The two volumes are fully synchronized. All updates
from the host to the P-VOL are duplicated at the S-VOL.
PSUS: The pair has been split by the user (pairsplit-r), or the pair has been released by the user from
the secondary system (pairsplit-S). The P-VOL and the S-VOL are not synchronized.
PSUE: The pair has been split by the primary storage system or the secondary storage system due
to an error or a failure. The P-VOL and the S-VOL are not synchronized.
HOLD: A pair for delta resync operation is created.
Pair Operation
(continued)
HLDE: An error occurred with the pair for delta resync operation.
HOLDING: The pair status is changing to HOLD while creating a delta resync pair.
Suspending: The P-VOL and the S-VOL are not synchronized. This pair is in transition from the PAIR
or COPY status to the PSUS/PSUE status
Deleting: The P-VOL and the S-VOL are not synchronized. This pair is in transition from the PAIR, COPY,
or PSUS/PSUE status to SMPL status.
•
JNL-MirrorID: A journal number and a mirror ID. The number on the left of the hyphen (-) is a journal
number. The number on the right of the hyphen is a mirror ID. This column is blank if the volume in the
local storage system is neither a P-VOL nor a S-VOL.
•
S/N (LDKC): The serial number and the LDKC number of the remote storage system. This column is
blank if the volume of local storage system is neither a P-VOL nor a S-VOL. This column can be blank
while the pair is in transition to the SMPL status. To view the latest information in this column, refresh
the screen.
•
CTRLID (Model Name): The serial number and the controller ID of the remote storage system. The model
name is enclosed by parentheses. The controller ID for a P9500 storage system is 6. The controller ID
for a XP24000/XP20000 Disk Array storage system is 5. The controller ID for a XP12000 Disk
Array/XP10000 Disk Array is 4. This column can be blank while the pair is in transition to the SMPL
status. To view the latest information in this column, refresh the screen.
•
Paired VOL: A data volume in the remote storage system. See the figures following this table for an
example. This column indicates a P-VOL if the remote storage system is a primary storage system. This
column indicates a S-VOL if the remote storage system is a secondary storage system. A device ID
ending in X (for example, 00:00:3C X) indicates the LDEV is a Thin Provisioning virtual volume. A
device ID ending in # (for example, 00:00:3C #) indicates the LDEV is an external volume. If a volume
is a volume of XP24000/XP20000 Disk Array, "00" appears for the LDKC number. This column shows
the port ID, GID, and LUN of the volume specified in the remote storage system when creating the
158 Continuous Access Journal GUI reference