HP XP P9500 Storage - Manual (Page 110)

Table 19 RAID Manager error codes for Continuous Access Journal (continued)
Error content Error code (SSB2) Error code (SSB1)
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was the external volume. 8F00
The Cnt Ac-J pair cannot be created because the specified volume is part
of a Business Copy or Flash Copy pair. 8F10
The Cnt Ac-J pair cannot be created. The processing of volume migration
could not be stopped because the P-VOL was being migrated by Auto LUN. 8F11
The Cnt Ac-J pair cannot be created because the specified volume was the
reserved volume. 8F14
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was in the state of online from the host. 8F17
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was used in a pair on another program product. 8F18
A request of Cnt Ac-J Paircreate was rejected because the emulation type
of the specified volume was unusable. 8F19
A request of Cnt Ac-J Paircreate was rejected because the specified P-VOL
was not in the SMPL status. 8F1B
A request of Cnt Ac-J Pairresync was rejected because the specified P-VOL
was not in the PSUS status. 8F1C
A request of Cnt Ac-J Paircreate or Pairresync was rejected because of the
one of following reasons. 8F21
•
The specified volume was the P-VOL of the Continuous Access
Synchronous.
• The unavailable configuration with the combination of the Business Copy
(including when the mirror ID of the Cnt Ac-J was 0).
•
Unavailable configuration of the status transition.
A request of Cnt Ac-J Paircreate was rejected because a path between the
devices was not created. 8F24
A request of Cnt Ac-J Paircreate or Pairresync was rejected because PIN
was existed in the specified volume. 8F25
A request of Cnt Ac-J Paircreate or Pairresync was rejected because it could
not access to the specified P-VOL or S-VOL. 8F28
A request of Cnt Ac-J Paircreate was rejected because the specified master
journal was unusable. 8F29
The Cnt Ac-J pair cannot be created because the specified P-VOL is a Flash
Copy S-VOL. 8F2A
A request of Cnt Ac-J Paircreate was rejected because the protect attribute
of the Data Retention was set for the specified P-VOL. 8F2B
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was used in a pair on the Continuous Access Synchronous or the Business
Copy. 8F33
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was blocked. 8F35
The following programs for OPEN systems might not be installed, or the
licenses of them might be expired. Please confirm settings for: 8F35
• Continuous Access Synchronous
•
Continuous Access Journal
110 Troubleshooting