HP XP P9500 Storage - Manual (Page 116)

Table 19 RAID Manager error codes for Continuous Access Journal (continued)
Error content Error code (SSB2) Error code (SSB1)
A request to create or resynchronize a pair in the system that consists of
multiple primary and secondary systems was rejected because the Cont EB28
Access Journal 3DC & 4x4 Open MF program product was not installed
in the secondary system.
A request to configure the system that consists of multiple primary and
secondary systems was rejected because the delta resync settings are
configured to the primary and secondary systems. EB29
A request of Cnt Ac-J Paircreate for delta resync operation was rejected
because the specified Cnt Ac-J pair was used in the system that consists of
multiple primary and secondary systems. EB2F
A request of Cnt Ac-J pair status transition was rejected because the specified
mirror ID was invalid. EB30
The specified Cnt Ac-J pair cannot execute the takeover because the
specified Cnt Ac-J pair belongs to the journal that dedicated Cnt Ac-J and
Continuous Access Synchronous combination (2DC configuration). EB45
A delta resync pair cannot be created due to one of the following reasons. EB48
• P-VOL of the Cnt Ac-J pair is different from P-VOL of the Continuous
Access Synchronous pair.
•
The serial number of the primary system that is recognized by P-VOL
and S-VOL is different.
A request of Cnt Ac-J Paircreate (journal suspend mode) was rejected
because the secondary system did not support the delta resync function. EB49
A pair cannot be created because the restore journal was not registered. EB4C
A pair cannot be created because the master journal was not registered. EB4D
A request of Cnt Ac-J Paircreate was rejected because the specified S-VOL
was not mounted. EB50
The Cnt Ac-J pair cannot be created because PIN data existed in the
specified S-VOL. EB51
The Cnt Ac-J pair cannot be created because the specified S-VOL cannot
be accessed. EB52
The Cnt Ac-J pair cannot be created because the specified S-VOL is blocked. EB53
The command was rejected because the specified S-VOL was online from
the host. EB57
The command was rejected because the specified journal volume or S-VOL
was reserved or being used in the storage system. Please check the status
of the volume. EB58
The command was rejected because the specified S-VOL was being migrated
by Auto LUN. Please check the status of the volume. EB59
The Cnt Ac-J pair cannot be created because the access attribute was set
to the specified P-VOL or S-VOL by the Data Retention. EB5B
Cnt Ac-J pair cannot be resynchronized because an internal logical error
occurred. EB5C
A request of Cnt Ac-J Paircreate was rejected because the state of S-VOL
was not SMPL. EB5E
A request of Cnt Ac-J Paircreate was rejected because the program product
of Cnt Ac-J was not installed in the secondary system. EB5F
116 Troubleshooting