HP Designjet T3500 Production eMFP - Manual (Page 64)

3. The spindle has a stop at each end. The blue stop can move along the spindle and has a latch to lock it in
place. Open the latch and remove the blue stop from the end of the spindle.
NOTE: For loading 3 inch core rolls, use adaptors in the spindle; insert an adaptor into each hub,
making sure they protrude, and that the blue tabs can be seen on the external side of the hub, and are
firmly in place.
4. If there is already a roll or core on the spindle, remove it.
5. If the roll is heavy, rest it horizontally on a table and insert the spindle into it.
TIP: You may need two people to handle a large roll.
54 Chapter 6 Paper handling ENWW