HP Designjet T3500 Production eMFP User Manual
Page 32
3.
In the printer's Embedded Web Server, select the Setup tab and then Scan to network. See
Embedded Web Server on page 46
Alternatively, in the HP Utility, select the Settings tab and then Scan to network. See
.
4.
On the Scan to Network page, click Add folder details, and fill in the various fields.
●
Protocol may be FTP or CIFS (Windows).
●
Folder type may be public or private. The folder type is displayed in both the Embedded Web
Server and the front panel with an icon. When you select a private folder, you must enter a
password in the front panel.
●
Alias name is displayed in the front panel when you are choosing the scan destination. It may be
different from the network or FTP folder name.
●
Set this network destination as a default or, only if installed, set this network destination as an
HP Designjet SmartStream folder (checkbox).
●
Server name should contain the network name of the remote computer.
●
Folder name should contain the share name of the folder.
●
User name should contain the name of the 'scanner user'.
22
Chapter 3 Setting up the printer
ENWW