Manual firmware updates, Update the software, Printer maintenance kits – HP Designjet T3500 Production eMFP User Manual
Page 170: Secure file erase
Manual firmware updates
Manual firmware updates can be performed in the following ways:
●
Using the Embedded Web Server, select the Setup tab and then Maintenance > Firmware update. Press
Check now to check whether new firmware is available. If new firmware is available, some information
about the new firmware is displayed, and you are given the opportunity to download and install it.
●
Using the HP Designjet Utility under Windows, select the Admin tab and then Firmware Update.
●
Using the HP Utility under Mac OS X, select Firmware Update.
●
Using HP Web Jetadmin, with which you can make manual firmware updates or request automatic
updates.
●
(according to your printer model) into the USB flash drive and insert it into the Hi-Speed USB host port in
the front panel. A firmware update assistant will appear on the front panel to guide you through the
update process.
Update the software
●
Under Windows, HP Software Update regularly offers to update your software automatically, and the
HP Designjet Utility may offer you automatic updates when restarted.
●
Under Mac OS X, Apple SW Update offers you software updates when available.
Printer maintenance kits
Two maintenance kits are available for your printer, containing components that may need to be replaced
after long use. When one of them is needed, a message is displayed on the front panel and by the HP Utility.
When you see the message, you should contact your support provider (see
and request the maintenance kit. The kits are installed by service engineers only.
Secure File Erase
The printer's hard disk is used as a temporary storage area for print jobs. Secure File Erase can erase your
temporary files from the hard disk to protect them from unauthorized access. It begins to do so as soon as
160 Chapter 16 Printer maintenance
ENWW