HP Designjet T3500 Production eMFP - Manual (Page 105)

8. While the scanned image is being printed, you can perform some other operation: you don't need to wait
for the end of the print.
9. After printing, you can choose to make another copy or go to the job queue. If you make another copy
immediately without returning to the home screen, the temporary settings used for the previous copy
are used again.
NOTE: By default, if the original is skewed in the scanner (not loaded straight), the scanner will try to
correct the skew automatically. To turn off this automatic correction, press , then Scan preferences >
De-skew > Off.
ENWW 95