HP Designjet T3500 Production eMFP - Manual (Page 102)

NOTE: If you change the settings in this way, the changed settings apply to the current job but are not
saved permanently. You can change the default settings from the main menu: press , then Scan
preferences.
5. When you are satisfied with the scan settings, press anywhere on the screen to return to the previous
page, then press Start.
6. Once the original has been scanned, you can (if you like) check the file size and change the
automatically-generated filename of the scanned image.
7. If you are scanning to a USB flash drive, wait until the scanned image has been saved in a file, then press
on the front panel and press Eject. Remove the USB flash drive when prompted by the front
panel.
8. A screen will appear asking if you want to eject the scanned sheet.
92 Chapter 9 Scanning ENWW