HP Netserver L Server series - Manual (Page 72)

Chapter 4 Configuration
66
Figure 4-30. Automatic Configuration->New Configuration->Finish
Perform the following steps, to determine your response to the Finish dialog box.
1. Examine the Configuration Summary for details about the configuration
RAID Assistant has prepared to set up automatically.
◊ If you want to start over, click the Back or Cancel button.
◊ If you want to view the configuration before it is applied to the
controller, click the Details button.
You will be taken to an equivalent of the Disk Arrays page as shown in
Manual Configuration, where you can only view and close the details
window.
◊ If you accept the configuration as presented, click the Apply button at
the Finish page to apply the new configuration to the controller.
A warning confirmation box appears as shown in Figure 4-31.