HP Netserver L Server series - Manual (Page 17)

Chapter 2 FCArray Assistant Software Information
11
The Select Components dialog box appears next. See Figure 2-4.
Figure 2-4. Select Program Components to Install
6. Select the desired components for FCArray Assistant installation by
checking the appropriate check boxes.
NOTE The FCArray Assistant Server software component is only
required on a managed server and not on a remote management
workstation. However, the FCArray Assistant Client software
should be installed on both the managed server and the remote
management workstation.
7. Uncheck any undesired component(s) to prevent installation at this time.
8. Click Next to continue, or Back to go to the previous screen.
9. Follow the on-screen prompts to carry out the remainder of the installation
for the selected components.
10. When the installation is complete, click Finish to exit the Install Shield
Wizard.