HP Netserver L Server series - Manual (Page 41)

Chapter 4 Configuration
35
3. Click the Open button to access the configuration file.
The Disk Arrays tab displays key elements of the configuration file you
just opened. See Figure 4-7.
Figure 4-7. Stored Configuration Information to Apply
4. Click the Cancel button to stop without applying the saved configuration.
5. Click the Apply button to apply the configuration to the controller.
If you select Apply, you will be overwriting the existing controller
configuration, when it goes into effect.
If you click Apply, you will be asked to confirm your decision to overwrite
the existing configuration.
6. Select Yes to confirm the decision to overwrite the existing configuration
and replace it with the previously saved configuration you just opened.
7. Or, click the No button to stop without overwriting the existing
configuration.