HP Netserver L Server series - Manual (Page 19)

Chapter 2 FCArray Assistant Software Information
13
Software Modifications
These software modifications are only required if you want to be notified of
controller events. However, HP recommends making the modification now.
DACEVENT Command
Once the FCArray Assistant Server software installation is complete, the
DACEVENT command must be modified to include the IP addresses or names of
all the client systems used with this server. This is done by manually editing the
DACSCM.CNF file. This file is located at:
\WinNT\System32\Drivers\DacSrv\dacscm.cnf
1. Open DACSCM.CNF in a text editor, such as Notepad.
2. Modify the DACEVENT line manually.
The DACEVENT line requires (after each -h parameter) the IP addresses
or names of the client systems used with this server. See Table 2-1.
See the text of the DACSCM.CNF file for details.
DACEVENT Command Line Parameters
Table 2-1. DACEVENT Command Line Parameters
Parameter
Value(s) / Default /
Example
Description
-h :
Values = or
Default = N/A
Example:
dacevent.exe -h 192.9.10.59
(sends events to client with
IP Address 192.9.10.59)
Define Clients to Receive
Events: Specifies the IP
Address or Name (for Windows
NT) of a client system to which
FCArray Assistant Server will
send events. These events can
be seen in the FCArray
Assistant Client Log
Information Viewer.