HP Netserver L Server series - Manual (Page 46)

Chapter 4 Configuration
40
6. To test the pager alarm using the settings you’ve just made, click the Test
button.
7. When you are satisfied with the Pager set up, click the OK button.
The new Pager entry appears in the lower window of the Alarm Setup
dialog box. Refer to Figure 4-10 for an example.
Remove Pager Alarm
1. Select the Pager alarm type in the upper window of Alarm Setup.
2. Select the desired Pager entry for removal in the lower window of the
Alarm Setup dialog box.
3. Click the Remove button.
A confirmation message is displayed as shown in Figure 4-12:
Figure 4-12. Remove Pager Entry Message
4. Click No to keep the Pager entry.
5. Click Yes to remove the Pager entry.