HP Netserver L Server series - Manual (Page 50)

Chapter 4 Configuration
44
3. In the E-mail setup box:
◊ Enable or disable this E-mail entry using the Enabled check box.
◊ Enter the E-mail address of the person who will receive an e-mail
message when sent.
◊ Enter the subject of the E-mail.
4. To test the E-mail alarm using the settings you’ve just made, click the Test
button.
5. When you are satisfied with the E-mail set up, click the OK button.
Your new E-mail entry appears in the lower window of the Alarm Setup
dialog box. Refer back to Figure 4-15 for an example.
Remove E-mail Alarm
1. Select the E-mail alarm type in the upper window of Alarm Setup.
2. Select the desired E-mail entry for removal in the lower window of Alarm
Setup.
3. Click the Remove button.
4. At the confirmation message, click No to keep the E-mail entry.
5. Or, click Yes to remove the E-mail entry.