HP Netserver L Server series - Manual (Page 39)

Chapter 4 Configuration
33
Figure 4-4. Define Server Groups Dialog Box
In the Define Server Groups dialog box, perform the following steps:
See Figure 4-4.
1. Click the Add button under the Server Groups section of the dialog box.
2. In the left window, type a name for the new server group.
3. Click the OK button.
The Define Server Groups dialog box reappears with the newly defined
server group added in the left window.
Adding a Server to the Servers List
With the Define Server Groups dialog box open, do the following:
See Figure 4-4.
1. Click the Add button under the Servers section of the dialog box.
2. In the right window, enter the IP address of the new server.
If you’re running FCArray Assistant Client under Windows NT, you may
enter the name of the server instead of the server's IP address.
3. Click the OK button.
The Define Server Groups dialog box reappears with the newly defined
server added to the right window.