HP 3000 Enterprise Virtual Array - Manual (Page 228)

of 1.00 mm2 or 18 AWG, and the length of the cord must be between 1.8 m, (6 ft) and 3.6 m (12
ft). If you have questions about the type of power cord to use, contact an HP authorized service
provider.
NOTE:
Route power cords so that they will not be walked on and cannot be pinched by items placed upon
or against them. Pay particular attention to the plug, electrical outlet, and the point where the cords
exit from the product.
Japanese power cord statement
Regulatory compliance and safety 228