Iscsi initiator setup for openvms, Rescan dialog box – HP 3000 Enterprise Virtual Array User Manual
Page 92
7.
See
iSCSI initiator setup for Windows (single-path)
for instructions to set up LUNs using HP
Command View.
8.
To verify that the LUNs are presented to the VMware host:
a.
Rescan for new iSCSI LUNs.
b.
In VMware’s VI client, select a server and click the Configuration tab.
c.
Choose Storage Adapters in the hardware panel and click Rescan above the Storage
Adapters panel.
The Rescan dialog box displays; see
d.
Select the Scan for New Storage Devices and the Scan for New VMFS Volumes checkboxes.
e.
Click OK.
The LUNs are now available for ESX server.
Figure 42 Rescan dialog box
.
NOTE:
When presenting iSCSI storage to Virtual Machines you must:
•
Create Virtual Machines using LSI Logic emulation.
•
Present iSCSI storage to a Virtual Machine either as a data store created on a iSCSI device, or
raw device mapping.
iSCSI Initiator setup for OpenVMS
Beginning with OpenVMS V8.3-1H1, the OpenVMS Software-Based iSCSI Initiator TDK is included
as part of the standard OpenVMS installation. The processes for configuring and enabling the initiator
are detailed in the following sections:
• Enabling Ethernet jumbo frames
Setting up the iSCSI Initiator and storage
92