HP 3000 Enterprise Virtual Array - Manual (Page 73)

2. Run the Xtend SAN application to discover and configure the EVA iSCSI targets. The Xtend SAN
iSCSI Initiator can discover targets either by static address or iSNS.
For static address discovery:
a. Select Discover Targets and then select Discover by DNS/IP ( Figure 26 ).
Figure 26 Discover targets
. b. Add the static IP address of the mpx iSCSI port in the Address field and then select Finish
(
Figure 27 ).
Figure 27 Add static IP address
. c. Select a target from the Discovered Target list and then click Add ( Figure 28 ).
EVA iSCSI Connectivity User Guide 73