HP 3000 Enterprise Virtual Array - Manual (Page 184)

Description Message
Number Log message ID
Logout attempted using Fibre Channel VP (vir-
tual port) index which has not been con-
figured. Operation attempted on an uncon-
figured VP.
1067
QLFC_Logout: VP Index 0x%x not con-
figured
42027
Event notification: Fibre Channel processor
encountered a system error (unrecoverable
firmware error).
1108 QLFC_HandleTeb: System Error 42068
Event notification: Fibre Channel driver en-
countered a fatal error.
1109 QLFC_HandleTeb: Driver Fatal Error 42069
Event notification: FC port logged out. 1112 QLFC_HandleTeb: FC Logout. 42072
Failed to allocate object for iSCSI session: out
of session resources.
1282
QLIS_AllocateSessionObject: Out of
session resources.
42242
Received iSCSI PDU with duplicate CmdSN
(command sequence number). Command PDU
will be dropped.
1292
QLIS_EnqueueiScsiPdu: Duplicate PDU,
CmdSN %d (0x%x), dropping it.
42252
Unable to allocate iSCSI Initiator object while
instantiating session.
1298
QLIS_InstantiateSession: Cannot add
Initiator to the database
42258
mpx100b ONLY. Exceeded the number of
iSCSI hosts allowed to connect to mpx100.
1299
QLIS_InstantiateSession: Maximum
number (%d) of allowed hosts already
logged in
42259
Failed to execute iSCSI command PDU due to
its CmdSN (command sequence number) be-
ing out of range. The log message provides
the incorrect CmdSN, the valid CmdSN range,
the first byte of the CDB, and the data length.
1444
QLIS_ProcessStartTrb: [%d] CmdSN %ld
is out of range (%ld—%ld), Cdb[0]
0x%02X, DataXferLen 0x%x.
42404
iSCSI login failed between receipt of PDU and
request for the data segment.
274
QLIS_LoginPduContinue: Operation
failed. Initiator 0x%x, TPB status 0x%x
41234
iSCSI login failed due to unsupported version
number in received login PDU.
278
QLKV_ValidateLoginTransitCsgNsgVer-
sion failed (status 0x%x)
41238
iSCSI login PDU contains invalid initiator
name. The format and character set used to
form the initiator name are invalid.
297
QLIS_LoginPduContinue: Invalid initiator
name. Initiator:
41257
iSCSI target login was attempted to a portal
(iSCSI1 or iSCSI2) on which the target is not
presented.
305
QLIS_LoginPduContinue: Target not
configured for Portal.
41265
iSCSI login PDU received for a target with a
target name unknown to the mpx100/100b.
307
QLIS_LoginPduContinue: Target not
found. Target name:
41267
iSCSI login PDU received without a target
name for a normal session.
308
QLIS_LoginPduContinue: Missing target
name.
41268
iSCSI login PDU received without an initiator
name key/value.
310
QLIS_LoginPduContinue: TSIH is 0 but
InitiatorName key/value not provided.
41270
Log data 184