HP 3000 Enterprise Virtual Array - Manual (Page 187)

Fibre Channel driver
The Fibre Channel driver error log messages are listed and described in Table 26 and described in
this section. Log messages beginning with #0 apply to FC port 1 (FC1) and log messages beginning
with #1 apply to FC port 2 (FC2).
Table 26 FC driver—error log messages
Description Message
Number Log message ID
The FC processor has received a SCSI com-
mand for an unknown target path or has run
out of resources to execute additional com-
mands.
87
#%d: QLUtmReceiveIo: Path invalid/FW
No resource count %x
106583
The FC processor was disabled by an IOCTL
request to the driver.
93 #%d: QLIoctlEnable: Adapter disabled 106589
The FC processor firmware failed initializa-
tion. The request to initialize was received
by the driver in an IOCTL request.
94 #%d: QLIoctlEnable: Initialize FW error 106590
The FC processor failed the external loop-
back test.
96
#%d: QLIoctlRunDiag: Diagnostic
loopback command failed %x %x %x
%x
106592
The FC processor failed to reinitialize in re-
sponse to an IOCTL disable request.
97
#%d: QLIoctlDisable: Re-initialize ad-
apter failed
106593
The FC processor reported a link-down con-
dition.
307
#%d: QLIsrEventHandler: Link down
(%x)
106803
The FC processor reported an unexpected
asynchronous event. The mailbox registers
provide status, event code, and data related
to the event.
317
#%d: QLIsrEventHandler: Unexpected
async event (%x), MB1=%x, MB2=%x,
MB3=%x, MB4=%x, MB5=%x,
MB6=%x, MB7=%x
106813
FC firmware failed to respond to a keep
alive command. FC firmware will be restar-
ted.
355 #%d: QLTimer: Heartbeat failed 106851
The driver has determined that the FC link is
unreliable and unusable, due to the number
of errors encountered. The link has been
taken down.
357
#%d: QLTimer: Link error count (0x%x)
exceeded, link down
106853
The FC processor was unable to obtain the
number of loop IDs required. This failure
occurs only when the FC processor is running
multi-ID firmware.
416 #%d: QLReserveLoopId: out of loop Ids 106912
The driver was unable to reestablish connec-
tion to target within the time-out and retry
counts and is therefore marking it offline.
432
#%d: QLMarkDeviceOffline: Device Id:
%x marked offline, cLinkDownTimeout
= %x, cPortDownRetryCount=%x
106928
The FC processor is unable to log into the
FC fabric name server.
452
#%d: QLSnsGetAllNext: Name server
login FAILED %x
106948
EVA iSCSI Connectivity User Guide 187