HP 3000 Enterprise Virtual Array - Manual (Page 152)

The following is an example of the save logs command:
mpx100 (admin) #> save logs
Save Event Logs completed. Package is mpx100_Evl.tar.gz
Please use FTP to extract the file out from the System.
The following are two examples of the save traces command:
mpx100 (admin) #> save traces
Save ASIC Traces completed. Package is mpx100_Asic_Trace.tar.gz
Please use FTP to extract the file out from the System.
mpx100 (admin) #> save traces
No ASIC trace files exist to save. Command aborted.
Examples
Set command
Configures general mpx100/100b parameters as well as the parameters for the Fibre Channel,
iSCSI, and management ports.
Admin session only Authority
set
chap
fc []
features
iscsi []
isns []
mgmt
ntp
properties
system
Syntax
fc [] : Sets FC port parameters.
features : Setsfeatures.
iscsi [] : Sets iSCSI port parameters.
isns [] : Sets iSNS parameters.
mgmt : Sets management port parameters.
ntp : Sets NTP parameters.
properties : Sets properties.
system : Set system parameters.
Keywords
The following is an example of the set command:
mpx100 #>set mgmt
Examples
Set CHAP command
Configures general mpx100/100b parameters.
Command line interface 152