HP 3000 Enterprise Virtual Array - Manual (Page 150)

password
start (or begin)
end (or stop)
cancel
Syntax
The following is an example of the password command:
mpx100 (admin) #> passwd
Press 'q' and the Enter key to abort this command.
Select password to change (0=guest, 1=admin): 1
account OLD password
: ******
account NEW password (6-128 chars) : ******
please confirm account NEW password : ******
Example
Ping command
Issues a ping to a device at a specific IP Address.
Admin session only to set Authority
ping Syntax
Quit command
Exits the CLI and returns the operator to the login prompt.
Admin session only to set Authority
quit Syntax
The following is an example of the quit command:
mpx100 (admin) #> quit
(none) login:
Example
Reboot command
Restarts the mpx100/100b firmware.
Admin session only Authority
reboot Syntax
Command line interface 150