HP 3000 Enterprise Virtual Array - Manual (Page 179)

C Log data
The mpx100/100b maintains a message log that can be displayed and retrieved by the operator,
either through the CLI or the SANsurfer GUI. The message log is persistent in that it is maintained
across the mpx100/100b power cycles and reboots. The three log message categories are:
• Informational log messages , page 179
• Error log messages , page 181
• Fatal log messages , page 191
The following sections describe the log message categories.
Informational log messages
The following sections list the informational log messages and the definitions of the messages, by
category.
Application modules
The informational log messages provided by application modules are listed in Table 21 .
Table 21 Application modules—informational log messages
Description
Message
Number
Log message ID
Router is booting up. 6 System Booting Up. 53254
User removed a target (iSR6140 or
iSR6142) or a target presentation
(iSR6142).
110
QLBA_RemoveTargetNodeObject : Tar-
getNode %s
53358
FC login occurred, origin xx (1 = HBA, 2
= Target, 3 = Initiator), VP (virtual port) xx,
Id (Loop ID) xx.
1026
QLFC_Login: Origin 0x%x, VP Index
0x%x, Id 0x%x
54274
FC login occurred with port ID xx.xx.xx. 1027 QLFC_Login: Port ID %.2x%.2x%.2x 54275
FC login occurred with WWNN
xx.xx.xx.xx.xx.xx.xx.xx.
1028
QLFC_Login: Node Name
%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x
54276
FC login occurred with WWPN
xx.xx.xx.xx.xx.xx.xx.xx.
1029
QLFC_Login: Port Name
%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x
54277
FC login event notification, VP (virtual port)
xx.
1111 QLFC_HandleTeb: FC Login. VP 0x%x 54359
An iSCSI initiator logged out of a router
presented target.
1331 QLIS_CloseSession: Initiator Logged out 54579
EVA iSCSI Connectivity User Guide 179