Verify your installation type and components, Installation information, Installation components – HP 3000 Enterprise Virtual Array User Manual
Page 42: Table 12

Verify your installation type and components
describes the iSCSI installation types and attachment modes for the HP StorageWorks EVA
and EVA4400 iSCSI connectivity option.
Table 11 Installation information
Fibre Channel attachment mode
Installation type
Direct connect (
on page 23 and
Factory installed with the Enter-
prise Virtual Array (EVA)
Fabric (
Direct connect (
on page 23 and
Field upgrade iSCSI option for an
existing EVA
Fabric (
Direct connect (
Field upgrade option for multipath-
ing capability for an existing EVA
with an iSCSI option
1
Fabric (
1
Adds a second mpx100
In addition to the configurations listed in
, the EVA8x00 is supported with up to four
iSCSI–Fibre Channel controller host ports, shown in
on page 25 and
lists installation components required for the iSCSI option.
Table 12 Installation components
Installation components
Option
N/A
HP StorageWorks EVA and EVA4400 iSCSI connectiv-
ity option—direct connect, factory installed
Fibre Channel SFPs and optical cables. See the HP
StorageWorks EVA iSCSI Connectivity Option
QuickSpecs at:
HP StorageWorks EVA and EVA4400 iSCSI connectiv-
ity option—fabric
1 mpx100 or mpx100b
1 EULA
1 Quick install instructions
1 ReadMeFirst
1 SR 232 port converter
1 Blank panel
1 B Bezel assembly, 1U
1 C-Shelf 1U
1 BKT slide 1U shelf, left
1 BKT slide 1U shelf, right
3 Nut U-Nut 10-32 0.615L x 0.520W CSZ
5 Screw, SEMS 10-32 Pan 0.625 XRCS
9 Screw, SEMS 10-32 Pan 0.325 XRCS
5 Nut, KEPs 10-32, 0.375AF CSZ EXT
2 Cable assembly, 4G copper, FC, SFP 2.0m*
1 PDU cord 2.4m (c13-c14)
2 EVA host port Fibre Channel loopback connectors
HP StorageWorks EVA and EVA4400 iSCSI connectiv-
ity option (parts list)
Installing and upgrading EVA iSCSI connectivity
42