HP 3000 Enterprise Virtual Array - Manual (Page 76)

Figure 30 Discovered targets
.
NOTE:
The mpx iSCSI port may present several iSCSI targets to the Xtend SAN iSCSI Initiator. Select
only one target from the list.
e. Select the newly-added target under Host name in the left frame.
f. Check the Visible box ( Figure 31 ). This allows the initiator to display the target status.
g. Check the Auto Login box. This configures the iSCSI Initiator to automatically log in to the
iSCSI target at system startup.
Setting up the iSCSI Initiator and storage 76