HP 3000 Enterprise Virtual Array - Manual (Page 112)

6. Select the Target Settings tab. Verify that the HBA state is Ready, Link Up and each target entry’s
state is Session Active (
Figure 61 ).
Figure 61 Target settings tab
.
Presenting LUNs to the QLogic iSCSI Initiator
To present LUNs to the QLogic iSCSI Initiator:
1. Follow procedures in “ Creating an iSCSI initiator host via HP Command View EVA ” on page
128 to:
• Create an iSCSI host entry, and
• Present LUNs to the iSCSI host
2. On the iSCSI HBA tab ( Figure 62 ) verify that the QLogic iSCSI HBA is connected to the iSCSI
LUNs in SMS under the HBA iSCSI port.
Figure 62 HBA iSCSI port connections
.
Setting up the iSCSI Initiator for multipathing 112