HP 3000 Enterprise Virtual Array - Manual (Page 186)

Description Message
Number Log message ID
Driver received an unsupported
pdu type with immediate data ad-
dress.
341
#%d: QLUtmProcessResponseQueue: Immediate
data addr %08x:%08x in unsupported PduType
74069
The iSCSI processor was unable to
connect with iSNS (iSCSI name
server).
513
#%d: QLiSNSEnableCallback: iSNS Server TCP
Connect failed
74241
The iSCSI processor reported that
the iSCSI port NVRAM (non-volatile
memory) contains invalid data
(checksum error).
849 #%d: QLIsrDecodeMailbox: NVRAM invalid 74577
Duplicate IP address is detected on
iscsi port %d
852
#%d: QLIsrDecodeMailbox: AEN %04x, Duplicate
IP address detected, MB[1-5] %04x %04x %04x
%04x %04x
74580
The iSCSI processor reported a link-
down condition.
859 #%d: QLIsrDecodeMailbox: Link down 74587
Driver received an invalid event
from iScsi FW.
892 #%d: QLProcessAen: Invalid event %x 74620
The driver failed to receive a
heartbeat from the iSCSI processor
for the specified number of
seconds.
928
#%d: QLReadyTimer: Adapter missed heartbeat for
%d seconds. Time left %d
74656
Driver did not receive a heartbeat
event from iScsi FW.
931
#%d: QLReadyTimer: Adapter missed heartbeat for
0x%x seconds.
74659
The driver timed out an iSCSI pro-
cessor operation and is aborting
the operation.
933
#%d: QLTimer: Abort pTpb=%p, Type %x, Timeout
0x%x DrvCount 0x%x, DdbIndex 0x%x
74661
The driver timed out an iSCSI pro-
cessor mailbox command.
935
#%d: QLReadyTimer: MBOX_CMD %04x %04x
%04x %04x %04x %04x %04x %04x timed out
74663
The driver timed out while attempt-
ing to reconnect with iSNS.
937 #%d: QLReadyTimer: QLiSNSReenable failed 74665
Driver detected an error that re-
quires iSCSI FW to be restarted.
977 #%d: QLProcessSystemError: Restart RISC 74705
iScsi FW failed to initialize. 1018
#%d: QLInitializeFW: MBOX_CMD_INITIAL-
IZE_FIRMWARE failed %04x %04x %04x %04x
%04x %04x
74746
The driver's initiator database is
full. The driver is capable of storing
1024 iSCSI Initiators in its data-
base. Use the CLI or GUI to remove
unwanted/unused iSCSI Initiators.
1056
#%d: QLUpdateInitiatorData: No more room in
Initiator Database
74784
The driver's target database is full.
Use the CLI or GUI to remove un-
wanted/unused iSCSI targets.
1072
#%d: QLSetTargetData: No more room in Target
Database
74800
Log data 186