System, Fatal log messages, Iscsi driver – HP 3000 Enterprise Virtual Array User Manual
Page 191: System—error log messages, Iscsi driver—fatal log messages
System
The error log messages provided by system modules are listed and described in
.
Table 28 System—error log messages
Description
Message
Number
Log message
ID
Failed to kill system task.
4
Failed to kill sys killer %d\n
237572
Reporting router exceeds maximum operating
temperature.
5
Temperature over high threshold %d
237573
The router temperature has returned to the
normal operating range and is d (C).
6
Temperature is back to normal range
%d
249862
Fatal log messages
The following sections list the fatal log messages by reporting module.
iSCSI driver
The fatal error log messages for iSCSI drivers are listed and described in
. Log messages
beginning with #0 apply to iSCSI port 1 (GE1) and log messages beginning with #1 apply to iSCSI
port 2 (GE2).
Table 29 iSCSI driver—fatal log messages
Description
Message
Number
Log message
ID
iSCSI processor SRAM test failed.
20
#%d: qlutm_init: Diagnostic failed, inval-
id SRAM
69652
iSCSI processor failed diagnostic reboot.
21
#%d: qlutm_init: Diagnostic failed, fail
reboot
69653
iSCSI processor failed NVRAM diagnostic.
22
#%d: qlutm_init: Diagnostic failed, inval-
id NVRAM
69654
iSCSI processor failed DRAM diagnostic.
23
#%d: qlutm_init: Diagnostic failed, inval-
id DRAM
69655
iSCSI processor failed to return diagnostic
result.
24
#%d: qlutm_init: Failed to return diagnost-
ic result to Bridge
69656
Response queue entry contains invalid
handle.
309
#%d: QLUtmProcessResponseQueue: In-
valid handle %x EntryType %x
69941
Set NVRAM reboot timer failed.
319
#%d: QLSetNvram: QLRebootTimer
failed AF %x RS %x Time %d
69951
Port disable reboot timer failed.
332
#%d: QLDisable: QLRebootTimer failed
AF %x RS %x Time %d
69964
EVA iSCSI Connectivity User Guide
191