HP 3000 Enterprise Virtual Array - Manual (Page 148)

Logout command
Exits the CLI and returns the operator to the login prompt.
Admin session only to set Authority
logout Syntax
mpx100 #> Example
LUNmask command
Maps a target LUN to an initiator. Also removes mappings. The command prompts the operator to
pick from a list of targets, LUNs, and initiators.
Admin session only to set Authority
LUNmask
add
remove
Syntax
add : Map a LUN to an initiator. The operator is prompted to
select an initiator from a list of initiators, then to select a target
from a list of targets and finally to select the LUN that is to be
mapped from a list of LUNs for the selected target.
remove : Remove the mapping of a LUN from an initiator. The
operator is prompted to select a target from a list of targets, then
to select the LUN from a list of LUNs for the selected target, and
finally to select the initiator that is to be unmapped from a list of
initiators.
Keywords
Closing a Telnet window during an admin session does not release
the session. You must either wait for the admin session to time
out, or issue the Admin Cancel command. Notes
Command line interface 148