Set system command, Set vlan command, Show command – HP 3000 Enterprise Virtual Array User Manual
Page 157: 157 set vlan command, 157 show command
trap_destinations
: The number of the trap destinations to be
configured for SNMP.
Parameters
The following is an example of the set snmp command:
mpx100 (admin) #> set snmp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
Configuring SNMP:
-----------------
Read Community
[
] Public
Trap Community
[
] Private
System Location
[
]
System Contact
[
]
Authentication Traps (0=Enable, 1=Disable) [Disabled
]
All attribute values that have been changed will now be saved.
Examples
Set System command
Configures the general mpx100/100b parameters.
Admin session
Authority
set system
Syntax
port_num
: The number of the iSCSI port to be configured for iSNS.
Parameters
The following is an example of the set system command:
mpx100 (admin) #> set system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
System Symbolic Name (Max = 64 characters) [ ] testing
Mode (0=Normal, 1=Transparent, 2=Encap_FC) [0 ]
System Log Level (Min = 0, Max = 3) [0 ]
All attribute values that have been changed will now be saved.
Examples
Set VLAN command
See the set iscsi command.
Show command
Displays mpx100/100b operational information.
Admin session only to set
Authority
show [keyword]
Syntax
EVA iSCSI Connectivity User Guide
157